Skip to content
Jul 5 / Robert Kakos

Free ANSYS Webinar Series

www.ansys.com : ANSYS Inc. external web site

Duration:
One hour

Cost:
Free

Who should attend?

•   Product scientists and engineers
•   Analysts
•   Technologists
•   Project managers and directors

For more information:
webinar@ansys.com


ANSYS Webinar Series

Automotive Exhaust Aftertreatment Simulations
This webinar will provide an overview of the simulation-based analysis of several aftertreatment applications with focus on selective catalytic reduction (SCR) systems.
Tuesday, July 10 at 9:00 a.m. EDT, 1:00 p.m. GMT
Thursday, July 12 at 4:00 p.m. EDT, 8:00 p.m. GMT

Computational Fluid Dynamics Applications for Offshore and Marine – 2012 Update
The webinar will provide a brief introduction to the ANSYS CFD tools followed by a series of technical case studies.
Tuesday, July 17 at 9:45 a.m. EDT, 1:45 p.m. GMT

Computational Structural Mechanics Applications for Offshore – 2012 Update
This webinar will be an update on recent applications of the ANSYS structural mechanics software in the offshore industry.
Thursday, July 19 at 9:45 a.m. EDT, 1:45 p.m. GMT

Power Electronics for Hybrid and Electric Vehicles
This webinar will show how electric drives are found in many areas of transportation and industrial automation and how the trend of incorporating more power electronics in mechatronic applications will continue and even accelerate due to significant benefits of weight and cost reduction.
Tuesday, July 24 at 4:00 p.m. EDT, 8:00 p.m. GMT
Thursday, July 26 at 9:00 a.m. EDT, 1:00 p.m. GMT

Optimized Design of Rotating Machinery for Durability and Fatigue
This webinar will show you how ANSYS nCode DesignLife enables product virtual testing before the initial prototype is built.
Tuesday, August 07 at 9:00 a.m. EDT, 1:00 p.m. GMT
Thursday, August 09 at 4:00 p.m. EDT, 8:00 p.m. GMT

Modeling Engine Ports Using ANSYS CFD
In this webinar, the use of ANSYS Workbench to analyze and optimize engine ports will be discussed.
Tuesday, August 28 at 9:00 a.m. EDT, 1:00 p.m. GMT
Thursday, August 30 at 4:00 p.m. EDT, 8:00 p.m. GMT

Understanding Hardware Selection for Structural Mechanics
This webinar will identify recommended hardware configurations for various usage and license scenarios and will help you maximize your return.
Tuesday, September 18 at 9:00 a.m. EDT, 1:00 p.m. GMT
Thursday, September 20 at 4:00 p.m. EDT, 8:00 p.m. GMT

ANSYS Ask The Expert Webinar Series
Ask-The-Expert – Modeling Creep Behavior in ANSYS Mechanical and Mechanical APDL 14.0
This webinar will explain how to model creep behavior in ANSYS Mechanical and Mechanical APDL 14.0.
Wednesday, July 11 at 9:00 a.m. EDT, 1:00 p.m. GMT

Ask-The-Expert – Best Practices for Scale-Resolving Simulations (SRS) with ANSYS CFD
This webinar will focus on discussing the types of flows for which each of the individual SRS models are suited and the impact of numerical settings on model performance.
Wednesday, July 11 at 4:00 p.m. EDT, 8:00 p.m. GMT

Ask the Expert – Battery Cell Electrochemical and Thermal Modeling
This webinar will show two battery models traditionally used separated have been connected together.
Wednesday, July 18 at 9:00 a.m. EDT, 1:00 p.m. GMT

Ask-the-Expert – Best Practices for Meshing Complex CAD Geometries in ANSYS Icepak
In this webinar you’ll see strategies to create a good quality, body-fitted mesh for a variety of complex CAD geometries using the Mesher-HD scheme in ANSYS Icepak.
Wednesday, July 18 at 4:00 p.m. EDT, 8:00 p.m. GMT

Ask-The-Expert – External Data Mapping in ANSYS Workbench and Mechanical 14.0
This webinar will explain how to use External Data to map results from various analysis types and products into ANSYS Mechanical and how to validate the mapping.
Wednesday, July 25 at 9:00 a.m. EDT, 1:00 p.m. GMT
Wednesday, August 08 at 4:00 p.m. EDT, 8:00 p.m. GMT

Ask-The-Expert – Modeling Rotordynamic Behavior in ANSYS Mechanical and Mechanical APDL 14.0
This webinar will explain how to model and assess rotordynamic behavior in ANSYS Mechanical and Mechanical APDL 14.0.
Wednesday, September 19 at 9:00 a.m. EDT, 1:00 p.m. GMT
Wednesday, October 03 at 4:00 p.m. EDT, 8:00 p.m. GMT

Leave a comment